China Industrial Equipment Components Pump Vacuum Equipment Gasoline Gas Pump Qyb-0.45/70 Pneumatic/Air Pressure Oil Pump for Coal Mine wholesaler

Merchandise Description

JIKAI Technologies Firm is Expert
Maker of Underground Mining Equipmen

   QYB-.45/70 pneumatic oil pump is the excellent gear to offer substantial-force oil power to jack. The essential technologies of this merchandise is adopting cycloid pump and plunger pump as oil supply from foreign sophisticated technological innovation. The rewards are as follows:
   •The massive displacement cycloid pump and plunger pump offer oil to the device, improve the performance of stretching device significantly
   •Compact composition, pneumatic motor drives the cycloid rotor pump and plunger pump at the identical axis directly, large-stress oil enters the actuator by the handbook valve, so scaled-down and lighter
   •Easy to run, immediate start off and brake, infinitely variable speeds, load commencing
   •Lower failure rate, will not fail thanks to overload, return to work following overload rescission Work with no electrical energy boost the defense of safe procedure.

Use and features

   oil pump is not only the electrical power provide of the devices that demand tremendous-large strain, and also the examination pump of the hydraulic parts and containers. Its cubage is small, and it is portable, sensible design and easy to preserve. It is suited for doing work in substantial altitude or some little areas, and some conditions which do not have electrical resource, gasoline supply.
 

Parameter

Merchandise Detail QYB-.45-70
one

Primary
Parameters

Output Oil Strain (MPa) .35 7 70
2 Output Oil Flux (L/min) 13.seven one.7 .forty five
3 Air Strain (MPa) 0.4-.7
four Outlet Stress (MPa) 20-70
5 Air Use (L/S) Compressed air is .7MPa ≤18.9
6 Oil Tank Ability (L) 13
seven Noisy (dB(A)) Air strain is .7MPa eighty-ninety
8 Bodyweight (kg) 33

 

At current, our company has constructed an advanced R&D program:Considering that 2007, the firm has understood the network and digitization of R&D and style work3D solid design and style and finite aspect analysisImplemented solution info lifecycle administration (PLM)project workflow administration the integration of PLM method and ERP systemthe paperless software of drawings and all specialized data.
For example: 3D integral casting scraper conveyor not only significantly increases the service daily life of the scraper, but also encourages the intelligent development of totally mechanized miningAnti-gas and anti-groundpressure automatic drilling rig, geared up with remote control and video checking system, with actual-time info collection functions, with one particular-essential drilling function and anti-stucking features, appropriate for groundpressure preventionThe nationwide III common explosion-evidence diesel engine monorail crane locomotive realizes multi-position direct transportation of hydraulic supports (48T) the drilling and bolting jumbo can drill with 1 essential, and understand the computerized construction of anchor rods and anchor cable holes.
All items have corresponding high quality management standards, which are completed concurrently with layout drawings and processes, and are recorded in the details administration system.

Each product is marked with a unique everlasting laser identification code when it is submitted for inspection. The inspection objects and documents correspond to each identification code, which realizes:1. Exclusive solution quality identification 2. Traceability of solution top quality troubles 3. Lifelong responsibility for item quality 4. The basis for improvement is precise and sufficient, and the improvement impact is tracked in location.
In recent years, we have been rated as ZheJiang Provincial Business Technologies Middle, HangZhou Coal Mining Equipment Engineering Technological innovation Analysis Center, ZheJiang Coal Mine Security Equipment Engineering Engineering Analysis Center (in preparation), ZheJiang Coal Mine Security Gear Inspection and Tests System (in preparation), The general public technologies research and advancement platform for coal mining machinery and gear of the Ministry of Commerce has been totally affirmed by pertinent departments in terms of item analysis and advancement, quality inspection, engineering technological innovation transformation, and public providers.
  In the foreseeable future, the engineering laboratory will get income by way of specialized patents and paid use of new items, enterprise technological engineering investigation and advancement jobs for coal mine protection equipment business, authorities scientific study funding, technological training and technical providers, and so forth. “The virtuous cycle operation method, and attempt to accomplish the sustainable growth of the laboratory.

US $310
/ Piece
|
1 Piece

(Min. Order)

###

After-sales Service: Service Machinery Overseas
Warranty: 12 Months
Certification: CE, ISO 9001:2000, Atex
Standard: Atex
Surface Treatment: Galvanized
Manufacturing Process: Casting

###

Customization:

###

Item Detail QYB-0.45-70
1

Main
Parameters

Output Oil Pressure (MPa) 0.35 7 70
2 Output Oil Flux (L/min) 13.7 1.7 0.45
3 Air Pressure (MPa) 0.4-0.7
4 Outlet Pressure (MPa) 20-70
5 Air Consumption (L/S) Compressed air is 0.7MPa 18.9
6 Oil Tank Capacity (L) 13
7 Noisy (dB(A)) Air pressure is 0.7MPa 80-90
8 Weight (kg) 33

###

US $310
/ Piece
|
1 Piece

(Min. Order)

###

After-sales Service: Service Machinery Overseas
Warranty: 12 Months
Certification: CE, ISO 9001:2000, Atex
Standard: Atex
Surface Treatment: Galvanized
Manufacturing Process: Casting

###

Customization:

###

Item Detail QYB-0.45-70
1

Main
Parameters

Output Oil Pressure (MPa) 0.35 7 70
2 Output Oil Flux (L/min) 13.7 1.7 0.45
3 Air Pressure (MPa) 0.4-0.7
4 Outlet Pressure (MPa) 20-70
5 Air Consumption (L/S) Compressed air is 0.7MPa 18.9
6 Oil Tank Capacity (L) 13
7 Noisy (dB(A)) Air pressure is 0.7MPa 80-90
8 Weight (kg) 33

###

What Is a Pulley?

The pulley is a wheel mounted on a shaft or axle. Its purpose is to support the movement of a cable that is taut. This cable transfers power to a shaft. However, there are certain safety precautions that you should follow when using a pulley. Read on to learn more! Listed below are common uses and their main parts. Listed below are some of the benefits of using a pulley.
pulley

Common uses of a pulley

A pulley is a common mechanical device used to increase the force needed to lift a heavy object. Most commonly, these devices are used in construction equipment. These machines use high-tension ropes to transfer heavy objects from one floor to another. Other common uses of a pulley include buckets and flagpoles. These devices are extremely useful in a wide range of applications. To learn more about the common uses of pulleys, keep reading.
A pulley is a wheel with grooves for holding rope. Its purpose is to change the direction and point at which a pulling force acts. It is usually used in sets to reduce the amount of force needed to lift a load, but the work involved is similar. Pulleys are also used in rock climbing devices. For many applications, a pulley is a vital part of construction.
The most common use of a pulley involves hoisting and lowering a flag. Other examples include clotheslines, bird feeders, and escalators. Pulleys are also commonly used on oil derricks. Many other common applications include hoisting and lowering garage doors. Pulley systems are also used in engines and cranes. For more information, check out our interactive pulley diagram!
Pulleys can also be used to lower total work required for a task. In many cases, a pulley will consist of two parts: the pulley hub and the shaft pulley. The hub clamps the shaft pulley, while the pulley itself is connected to the motor or other device. If you’re looking for a pulley, it’s important to learn how it works.
The most common uses for a pulley involve lifting heavy objects, and the mechanism used to lift them is known as a pulley. A pulley is an industrial device that uses two wheels to reduce the force needed to lift a weight. The pulley reduces this force by half by allowing the user to pull on the rope four times as far. The pulley also allows for a smaller lifting distance.

Main parts of a pulley

A pulley consists of the main element of a system. This is typically a cable, rope, belt, or chain. There are two basic types of pulleys – a Driver Pulley and a Follower Pulley. Pulleys are available in small and large sizes. The periphery part of the pulley is called the Face, and the protruding middle part is called the Crown. A pulley’s face can be round, rectangular, or even “V” shaped.
The first pulley was created by the Greek mathematician Archimedes in the third century BCE. These simple machines are made of a rope, an axle, and a wheel. The pulley’s end is attached to a person, object, or motor. These machines can be used in various tasks to lift heavy objects. The pulley is a great mechanical advantage for any lifter.
The ideal mechanical advantage of a pulley is defined by the number of rope segments that pull an object. The higher the number of loops on the rope, the higher the mechanical advantage. The greater the mechanical advantage, the less force is required to move the object. Likewise, the greater the distance the rope traverses, the higher the mechanical advantage of a pulley. There are several different types of pulley, depending on their combination of rope, wheel, and rope.
The basic components of a pulley are the face and hub, and the rope is threaded into the center of the pulley. The pulley is usually made of a rope and can be used to lift heavy weights. It can also be used to apply great force in any direction. Step pulleys have multiple faces, which are fixed in sequence. They can also increase the speed of the driven pulley.
A pulley is a simple machine consisting of a wheel, rope, or chain. These parts are crucial for making moving and lifting easier. Because they change the direction and magnitude of force, they can be a useful tool. Some pulleys even change direction. You can learn more about the pulley by downloading this resource today. The resources are designed to support the new 9-1 GCSEs in Design & Technology and Engineering.
pulley

Mechanical advantage

Pulleys have been used to move heavy objects for centuries. When two rope sections are used, the weight of a 100kg mass can be moved with only 500 newtons of force. Adding an extra pulley increases the mechanical advantage. If the pulley has two wheels, the distance between the rope sections and the wheel grooves is only half the distance, but the mechanical advantage still applies. Adding another pulley increases the mechanical advantage, but can be risky.
Mechanical advantage is the ratio of force used versus force applied. The calculations are made under the assumption that the ropes and weights do not elongate or lose energy due to friction. If the weights are very light, the mechanical advantage is greater than that in the real world. To calculate the mechanical advantage, the weight of the load to be lifted must be the same as the weight of the person using the pulley.
A single moveable pulley has a mechanical advantage of two. The weight passes around the pulley, and one end of the rope is attached to a fixed point. The pulling force is then applied to the other end of the rope. The distance the weight travels doubles, or halved, depending on the direction of the pulley. Adding a second pulley reduces the distance and the effort required to lift it.
There are several ways to calculate the mechanical advantage of a pulley system. Some methods are specific to certain types of systems, while others work for all systems. The T-Method is a good choice in many applications, as it calculates the units of tension for each rope segment. Once you have determined the input force, you need to determine the maximum force that will be applied to each component. A compound pulley, for example, will require 4 units of tension for each rope segment.
In simple terms, the effort is the amount of force needed to lift the load. This force is measured in newtons (N). A mechanical advantage is often presented without units. If the student does not have this unit, you may need to convert the units to newtons, since one kilogram is equal to 10 newtons. If you can’t figure out the units of effort, you can use the KWL chart provided by the teacher.
pulley

Safety precautions

There are a few safety precautions you should take when using a pulley. First, always check the SWL (safe working load) before attaching anything to the pulley. This indicates the maximum weight and angle the pulley can safely handle. Second, make sure that your work area is free from people and debris. Third, wear a hard hat to protect your head from blows and falling objects.
Another important consideration is anchoring. Although the pulley reduces the weight of an object, it is not enough to eliminate the weight. This is especially true if you are hoisting a heavy object, such as a motorcycle or lawnmower. It is important to ensure that the anchoring point can support the entire weight of the load. It is also important to follow proper anchoring procedures when using a pulley to lift a motorcycle or lawnmower.
In addition to the safety latch, you should use a tag line to control the suspended load. Remember that a chain pulley block is necessary for vertical lifting. You should also wear personal protective equipment (PPE) while using a pulley to avoid injuries. If your workplace does not have an PPE policy, you should consider implementing a similar policy. These safety guidelines are a good start.
If you are using a pulley to lift heavy objects, make sure to wear gloves. Those who are not familiar with rope-pulling will have an easier time demonstrating how it works. If you are using a rope-pulley system in a classroom, be sure to follow lab safety guidelines. Wear cloth gloves, clear the area, and do not jerk the rope. In addition, never allow yourself to be pulled into the rope by an unfamiliar person.
Another important safety precaution when using a pulley is to ensure that the anchor point for your system is adequate to support the weight of the object being lifted. Check with the manufacturer of the pulley to find out what its weight limit is, as some types of pulleys are designed to lift much heavier weights than others. It is important to follow all manufacturer’s instructions when using a pulley.

China Industrial Equipment Components Pump Vacuum Equipment Gasoline Gas Pump Qyb-0.45/70 Pneumatic/Air Pressure Oil Pump for Coal Mine     wholesaler China Industrial Equipment Components Pump Vacuum Equipment Gasoline Gas Pump Qyb-0.45/70 Pneumatic/Air Pressure Oil Pump for Coal Mine     wholesaler
editor by czh 2022-11-28